Ultracapacitors for port crane applications: Sizing and techno-economic analysis

The use of energy storage with high power density and fast response time at container terminals (CTs) with a power demand of tens of megawatts is one of the most critical factors for peak reduction and economic benefits. Peak shaving can balance the load demand and facilitate the participation of small power units in generation based on renewable energies. Therefore, in this paper, the economic efficiency of peak demand reduction in ship to shore (STS) cranes based on the ultracapacitor (UC) energy storage sizing has been investigated. The results show the UC energy storage significantly reduce the peak demand, increasing the load factor, load leveling, and most importantly, an outstanding reduction in power and energy cost. In fact, the suggested approach is the start point to improve reliability and reduce peak demand energy consumption

Sustainability ranking of desalination plants using Mamdani Fuzzy Logic Inference Systems

As water desalination continues to expand globally, desalination plants are continually under pressure to meet the requirements of sustainable development. However, the majority of desalination sustainability research has focused on new desalination projects, with limited research on sustainability performance of existing desalination plants. This is particularly important while considering countries with limited resources for freshwater such as the United Arab Emirates (UAE) as it is heavily reliant on existing desalination infrastructure. In this regard, the current research deals with the sustainability analysis of desalination processes using a generic sustainability ranking framework based on Mamdani Fuzzy Logic Inference Systems. The fuzzy-based models were validated using data from two typical desalination plants in the UAE. The promising results obtained from the fuzzy ranking framework suggest this more in-depth sustainability analysis should be beneficial due to its flexibility and adaptability in meeting the requirements of desalination sustainability

Imipenem resistance in clinical Escherichia coli from Qom, Iran

OBJECTIVE: The emergence of metallo-\u3b2-lactamase-producing Enterobacteriaceae is a worldwide health concern. In this study, the first evaluation of MBL genes, bla IMP and bla VIM , in Escherichia coli resistant to imipenem isolated from urine and blood specimens in Qom, Iran is described. Three hundred urine and blood specimens were analysed to detect the presence of E. coli. Resistance to imipenem and other antimicrobials was determined by disk diffusion and MIC. MBL production was screened using CDDT. PCR was also carried out to determine the presence of bla IMP and bla VIM genes in imipenem-resistant isolates. RESULTS: In total, 160 E. coli isolates were collected from March to May 2016. According to disk diffusion, high-level of resistance (20%) to cefotaxime was observed, whereas the lowest (1%) was detected for tetracycline. In addition, five isolates showed resistance to imipenem with a MIC\u2009 65\u20094 \ub5g/mL. CDDT test confirmed that five isolates were MBL-producing strains, but no bla IMP and bla VIM genes were detected. Results of this study show a very low level of resistance to imipenem in our geographical area

On triangularizability of the commutant of a single matrix

AbstractThe main purpose of this paper is to characterize triangularizable matrices A∈Mn(F) whose commutants are triangularizable, where F is an arbitrary field. More precisely, we show that the commutant of a triangularizable matrix A∈Mn(F) is triangularizable if and only if for any eigenvalue λ of A, the corresponding Jordan blocks in the Jordan canonical form of A have distinct sizes

A nearly zero-energy microgrid testbed laboratory: Centralized control strategy based on SCADA system

Currently, despite the use of renewable energy sources (RESs), distribution networks are facing problems, such as complexity and low productivity. Emerging microgrids (MGs) with RESs based on supervisory control and data acquisition (SCADA) are an effective solution to control, manage, and finally deal with these challenges. The development and success of MGs is highly dependent on the use of power electronic interfaces. The use of these interfaces is directly related to the progress of SCADA systems and communication infrastructures. The use of SCADA systems for the control and operation of MGs and active distribution networks promotes productivity and efficiency. This paper presents a real MG case study called the LAMBDA MG testbed laboratory, which has been implemented in the electrical department of the Sapienza University of Rome with a centralized energy management system (CEMS). The real-time results of the SCADA system show that a CEMS can create proper energy balance in a LAMBDA MG testbed and, consequently, minimize the exchange power of the LAMBDA MG and main grid

Climate change, water quality and water-related challenges : a review with focus on Pakistan

Climate variability is heavily impacting human health all around the globe, in particular, on residents of developing countries. Impacts on surface water and groundwater resources and water-related illnesses are increasing, especially under changing climate scenarios such as diversity in rainfall patterns, increasing temperature, flash floods, severe droughts, heatwaves and heavy precipitation. Emerging water-related diseases such as dengue fever and chikungunya are reappearing and impacting on the life of the deprived; as such, the provision of safe water and health care is in great demand in developing countries to combat the spread of infectious diseases. Government, academia and private water bodies are conducting water quality surveys and providing health care facilities, but there is still a need to improve the present strategies concerning water treatment and management, as well as governance. In this review paper, climate change pattern and risks associated with water-related diseases in developing countries, with particular focus on Pakistan, and novel methods for controlling both waterborne and water-related diseases are discussed. This study is important for public health care, particularly in developing countries, for policy makers, and researchers working in the area of climate change, water quality and risk assessment

Evaluation of the effect of sodium silicate addition to mine backfill, Gelfill – Part 2: Effects of mixing time and curing temperature

The effects of mixing time and curing temperature on the uniaxial compressive strength (UCS) and microstructure of cemented hydraulic fill (CHF) and sodium silicate-fortified backfill (Gelfill) were investigated in the laboratory. A series of CHF and Gelfill samples was mixed for time periods ranging from 5 min to 60 min and cured at temperatures ranging from 5 �Cto 50 �C for 7 d, 14 d or 28 d. Increasing the mixing time negatively influenced the UCS of Gelfill samples, but did not have a detectable effect on CHF samples. The curing temperature had a strong positive impact on the UCSs of both Gelfill and CHF. An elevated temperature caused rapid UCS development over the first 14 d of curing. Mercury intrusion porosimetry (MIP) indicated that the pore size distribution and total porosity of Gelfill were altered by curing temperature

Evaluation of the effect of sodium silicate addition to mine backfill, Gelfill − Part 1

In this paper, the mechanical properties of sodium silicate-fortified backfill, called Gelfill, were investigated by conducting a series of laboratory experiments. Two configurations were tested, i.e. Gelfill and cemented hydraulic fill (CHF). The Gelfill has an alkali activator such as sodium silicate in its materials in addition to primary materials of mine backfill which are tailings, water and binders. Large numbers of samples of Gelfill and CHF with various mixture designs were cast and cured for over 28 d. The mechanical properties of samples were investigated using uniaxial compression test, and the results were compared with those of reference samples made without sodium silicate. The test results indicated that the addition of an appropriate amount of an alkali activator such as sodium silicate can enhance the mechanical (uniaxial compressive strength) and physical (water retention) properties of backfill. The microstructure analysis conducted by mercury intrusion porosimetry (MIP) revealed that the addition of sodium silicate can modify the pore size distribution and total porosity of Gelfill, which can contribute to the better mechanical properties of Gelfill. It was also shown that the time and rate of drainage in the Gelfill specimens are less than those in CHF specimens made without sodium silicate. Finally, the study showed that the addition of sodium silicate can reduce the required setting time of mine backfill, which can contribute to increase mine production in accordance with the mine safety

Developing a fuzzy expert system to predict the risk of neonatal death

Introduction: This study aims at developing a fuzzy expert system to predict the possibility of neonatal death. Materials and Methods: A questionnaire was given to Iranian neonatologists and the more important factors were identified based on their answers. Then, a computing model was designed considering the fuzziness of variables having the highest neonatal mortality risk. The inference engine used was Mamdani's method and the output was the risk of neonatal death given as a percentage. To validate the designed system, neonates' medical records real data at a Tehran hospital were used. MATLAB software was applied to build the model, and user interface was developed by C# programming in Visual Studio platform as bilingual (English and Farsi user interface). Results: According to the results, the accuracy, sensitivity, and specificity of the model were 90, 83 and 97, respectively. Conclusion: The designed fuzzy expert system for neonatal death prediction showed good accuracy as well as proper specificity, and could be utilized in general hospitals as a clinical decision support tool. ©2016 Reza Safdari, Maliheh Kadivar, Mostafa Langarizadeh, Ahmadreaza Farzaneh Nejad, Farzaneh Kermani

Impact of hepcidin antimicrobial peptide on iron overload in tuberculosis patients

Background: Iron acquisition is essential for the growth of Mycobacterium tuberculosis. Hepcidin is known as an antimicrobial peptide and a component of the innate immune response. Hepcidin inhibits M. tuberculosis growth in vitro. In this study, we decided to identify-582A> G variants of the HAMP promoter in patients with tuberculosis (TB) and investigate its effect on serum iron, ferritin, and hepcidin levels. Methods: The sample population consisted of 105 patients with TB and 104 healthy individuals. The-582A> G polymorphism was genotyped using a tetra-primers PCR set. Serum levels of hepcidin were determined using an ELISA kit. Statistical analysis was performed using SPSS software. Results: The G allele is meaningfully associated with TB disease (95% confidence interval = 2-4.8, p G polymorphism genotypes. There was significant reverse correlation between hepcidin and iron (r =-0.849, p = 0.006). Conclusion: A high association was found between serum hepcidin levels and the HAMP-582A> G variants in patients with TB. These observations indicate a hypothetical role of this polymorphism in iron metabolism. Hepcidin could perhaps be an option for the treatment of TB. © 2014 Informa Healthcare